mitsumi gps antenna GPA-CG2C9 outline this new generation gps antenna is a further improvement on the general, commercially available gps-cg2c1 becoming the standard model. while fulfilling demand for further enhancements, the number of parts used has been reduced to achieve cost savings. specifications have been standardized to meet market needs. telecommunication component features 1. compact size: 34(w) 36(l) 12.9(h)mm (nearly a 40% reduction over our conventional model). 2. reduction in the number of parts used (also a 45% reduction over our conventional model). 3. excellent performance characteristics (nf has risen to 1.0db typ.) 4. superb structural design. enhanced resistance to water for greater reliability (conforms to jis c0920 class7). reliable fastening with neodymium magnet. 5. proposed standardization of specifications (mitsumi standard case, no silk screen printing, cable length 5m). 6. power source voltage may be freely selected from 3 ~ 5v. 3 types of connector are used (cn, hfc, gt-16). 7. produced in tianjin, china. specifications item specifications reception frequency 1575.42?.023mhz reception polarization right hand circular polarization antenna antenna gain 0dbi min. * 1. output impedance 50 ? reception frequency 1575.42?.023mhz noise figure 1.0db typ. lna gain 26db typ. gain flatness (within reception band) 1db max. ex-band attenuation 23db typ. overall gain 30dbi typ. (zenith) * 2 overall power supply voltage 3~5v consumption current 17ma typ. 30ma max. minimum order 10,000pcs/year * parameters: attached to gnd board (70 70mm) * parameters: attached to gnd board (70 70mm, cable length 5m)
mitsumi dimensions gps antenna 34 2 r200 4 r12 20 7.4 3 12.9 2 r10 36 r200 (13.1) 2 r12 cable connector unit : mm * for the technical details of the products in this page, please refer to sales technique dept., akita mitsumi co., ltd. phone: 0 18 (877) 7339.
|
